Restaurant staff typically unplug devices as part of their closing routine. The next day, they restart everything for the new business day. 

When the iPad (where the Eats365 POS is installed) is powered off, connected devices like card readers, barcode scanners, and printers, may also disconnect. This can cause connectivity issues if the devices aren’t restarted correctly. 

In this article, you’ll learn how to properly power on your Eats365 POS system.

To start up your Eats365 POS system, follow the steps below:

1. If the router is turned off, turn on the router to re-establish Internet connection.
2. For each device, plug the power cable into the power outlet.
3. If your card reader is connected to the iPad via an adapter, ensure that the card reader is properly plugged into the adapter, and that the adapter is plugged into the iPad.
4. For devices that are hardwired, ensure that the Ethernet cable is properly connected to the device’s LAN port.
5. Then, turn on the devices and wait for them to boot up.
6. Once all your devices are turned on and receiving power, test your POS system to check if all devices are connected and working.

If one or more devices is not connected, restart the POS system once more and check again.