Troubleshooting
Table of Contents
All devices offline
Learn how to troubleshoot network issues where multiple or all devices are offline.
A stable internet connection is crucial to smoothly process orders, payments, and the overall operations of a restaurant. On rare occasions, your iPad devices and printers may become offline due to network issues. This article discusses the basic troubleshooting steps that you can take to identify the cause and resolve common network issues affecting multiple devices.
In this article, you’ll learn how to identify when your devices are offline, the causes and how to restore their connectivity.
Indicators
The following scenarios can be observed during a network failure:
- No print jobs are being printed on wireless printers.
Note: You can still print normally if the POS and the printer are connected locally using an Ethernet cable. - Modules are unable to operate.
- POS shows Offline.
Common causes
- The router may have been accidentally unplugged from the power outlet.
- There may be a service outage.
Troubleshooting
To troubleshoot the issue, follow the steps below:
- Check your router’s LED lights. You may need to refer to your router or Internet Service Provider’s (ISP) manual to determine what the lights represent. If there are lights that indicate service loss, contact your ISP.
- Perform a power cycle on your router.
- Unplug the router’s power cord from the power outlet.
- Leave the power cord unplugged for one minute, then plug it back in.
- Wait until all of the lights on the router come back on.
- Check if the issue is resolved. If this does not resolve the issue, proceed to the next step.
- Perform a power cycle on the iPad and printer.
-
iPad models with a home button
- Press and hold the top button until the slide to power off option appears.
- Drag the slider, then wait for 30 seconds for your device to turn off.
- To turn your device back on, press and hold the top button until the Apple logo appears.
- Check if the issue is resolved. If this does not resolve the issue, proceed to the next step.
-
iPad models without a home button(iPad Air (4th generation), iPad Pro 11-inch, iPad Pro 12.9-inch (3rd & 4th generation))
- Press and hold one of the volume buttons and the top button until the power off slider appears.
- Drag the slider, then wait 30 seconds for your device to turn off.
- To turn your device back on, press and hold the top button until the Apple logo appears. Check if the issue is resolved. If this does not resolve the issue, proceed to the next step.
-
Printer
- Unplug the printer’s power cord from the power outlet.
- Leave the power cord unplugged for one minute, then plug it back in.
- Wait until all of the lights on the printer come back on. Check if the issue is resolved.
-
iPad models with a home button
Issue not resolved
If all of your devices still appear offline after performing a power cycle on the router, iPad, and printer devices, contact your ISP.